Nikon EN-EL3, MH-18a, MH-18, MH-19 Battery Charger

Some Information of Battery Charger

Instructions:

1. Plug the AC power adapter in a wall outlet.
2. Connect the AC power adapter supplied with your charger to the DC in jack.
3. "STATUS" indicator shows RED when the charger is ready and “charger” indicator shows flashing GREEN when waiting for battery pack.
4. Slide battery pack in the Charger and “CHARGER” indicator goes RED when charging.
5. “CHARGE” indicator shows RED and GREEN alternatively when battery pack has more than 90% charged.
6. When the battery pack is fully charged, the “CHARGE” indicator shows a steady green.
7. After the battery pack fully charged, slide the battery pack out.
8. Unplug DC power, “CHARGE” and “STATUS”indicators go out.

Note:

While charging the battery pack, “STATUS”indicator and “CHARGE” indicator are absent if the AC power adapter is not connected properly.

Maintenance:

1. Charge at room temperature.
2. Store in cool and dry place.
3. Clean up the terminals with a soft cloth if soiled.
4. Unplug AC power adapter when not in use.

TYPICAL CHARGE TIME

Capacity	3.6/3.7V	7.2/7.4V
650mAh(2.4Wh)	1 Hour	1 1/2Hour
1200mAh(4.2Wh)	1 1/2 Hour	2Hour
1800mAh(6.4Wh)	2 1/4 Hour	3Hour

Caution & Warning:

1. Do not expose the product to fire, rain or moisture.
2. Do not use AC power adapter other than specified by manufacturer.